We are at your disposition, if you have questions or need support:
We have a number of blogs for support and information:
Free Calibration Service
Make a multi-point measurement with our IAP Calibration software and send the data to us. We will then propose optimised calibration settings, which you can load into the processor. IAP Calibration software allows you to transparently see and modify what we did. This system and service enables a quality of calibration (gain/delay, equalizers, bass management) previously only possible by having an expert in room equalization on site.
IAP Utilities are a suite of unique softwares, for convenient setup of our processors.
This software reads and displays the parameters of your processor. You can conveniently modify parameters, while they are in real-time transmitted to the processor. You can also save your settings to files and later open and restore them.
This is a unique and powerful tool for stereo/multi-channel multi-point room measurement. Gains and delays can be set automatically. Visualizations of your system’s time and frequency responses aid setting of the parametric equalisers and bass management.
Update the firmware of your IAP. All settings are preserved during update.
The latest IAP Calibration and IAP Controller software open files from previous versions seamlessly.
The Windows and OS X firmware/software packages below contain the latest IAP firmware and softwares.
Latest IAP 2 / 4 / 8 Firmware and Software:
Latest IAP 16 Firmware and Software:
IAP 2/4/8 USB audio works with Windows and OS X without a driver. For higher sampling rates than 96 kHz on Windows, you need the IAP USB Audio Class 2 driver.
Previous IAP Firmware/Software Versions:
IAP Owner's Manual
Remote Control Codes
IAPs support more commands than available on its remote control. For optimal integration with automation systems, use these IR control codes: